EdilKamin CORAL 1 Installation, Usage Et Maintenance page 12

• • PRINCIPLE OF OPERATION
CORAL stoves are made with a steel structure and covering. CORAL stoves are made with a steel structure and covering.
The fi rebox is fi nished internally with refractory material with a The fi rebox is fi nished internally with refractory material with a
concave fi re bed, to contain the embers correctly, complete with concave fi re bed, to contain the embers correctly, complete with
ash grate in cast iron and a grate shaker. ash grate in cast iron and a grate shaker.
Internal fi rebox dimensions: Internal fi rebox dimensions:
- CORAL 1 = cm 30 (L), cm 34 (P), cm 34 (H).
- CORAL 2 = cm 34 (L), cm 34 (P), cm 34 (H).
- CORAL 3 = cm 36 (L), cm 34 (P), cm 34 (H).
- IVORY = cm 30 (L), cm 34 (P), cm 34 (H).
Door on the mouth of the stove Door on the mouth of the stove
(ONLY for CORAL 1-2 and IVORY Illustr. 3-4) (ONLY for CORAL 1-2 and IVORY Illustr. 3-4)
One of the features of the CORAL stoves is that the door (for One of the features of the CORAL stoves is that the door (for
loading wood) slides upwards instead of opening outwards. loading wood) slides upwards instead of opening outwards.
The sliding action is assisted by a counterweight and forward The sliding action is assisted by a counterweight and forward
movement to avoid damaging the gaskets. movement to avoid damaging the gaskets.
It can also be opened outwards using the detachable handle It can also be opened outwards using the detachable handle
supplied so the glass can be cleaned. supplied so the glass can be cleaned.
(ONLY for CORAL 3) (ONLY for CORAL 3)
The door can ONLY be opened (for loading wood and cleaning The door can ONLY be opened (for loading wood and cleaning
the glass) outwards using the fi xed handle. the glass) outwards using the fi xed handle.
The fl ue can be installed at the top or back, depending on instal- The fl ue can be installed at the top or back, depending on instal-
lation requirements. lation requirements.
The supply of combustion air to the fi rebox has been carefully The supply of combustion air to the fi rebox has been carefully
designed to guarantee optimum combustion, a gentle fl ame and designed to guarantee optimum combustion, a gentle fl ame and
clean glass. The primary combustion air (5) enters just above clean glass. The primary combustion air (5) enters just above
the fi re bed, fl owing across the embers. the fi re bed, fl owing across the embers.
Combustion air valve Combustion air valve
The primary combustion air can be adjusted using the valve, the The primary combustion air can be adjusted using the valve, the
control for which (8) is located on the top (Illustr. 2). control for which (8) is located on the top (Illustr. 2).
N.B. use the gloves provided to prevent burns. N.B. use the gloves provided to prevent burns.
• "Switching on"/max. calorifi c power position: • "Switching on"/max. calorifi c power position:
Air valve control fully extracted. Air valve control fully extracted.
Lighting the stove from cold and maximum fi re power Lighting the stove from cold and maximum fi re power
• "Maintain embers" position: • "Maintain embers" position:
Air valve control retracted. Air valve control retracted.
All primary combustion air passages are closed. All primary combustion air passages are closed.
• Intermediate position: • Intermediate position:
To be assessed to obtain optimum combustion. To be assessed to obtain optimum combustion.
Illustr. 3 - Detail of sliding door opening
FEATURES
3
5
6
7
1) Upper and lower smoke outlets
2) Glass cleaning air
3) Post-combustion from top - SCP
4) Firebox in refractory material
5) Primary combustion air
6) Thermostatic valve (optional)
7) Fully ducted combustion air intake
Fig. 2
Illustr. 4 - Maximum height with sliding door open 176 cm.
CORAL 1
- 12
-
1 4
CORAL 2 IVORY
1
2
8