Features; Assembly - Ryobi CFS1503 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Sanding Pad Length ..............................................5-1/2 in.
Cord Length ...............................................................10 ft.
Orbit Diameter ........................................................ 1/16 in.
kNOW yOUR COMPACT FINISH SANDER
See Figure 1, page 11.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
CIRCULAR SANDING ACTION
The oscillating action of the sander produces very quick,
small circular motion of the sanding pad. The motion is
ideal for producing a fine finished grain or, when using
the scrubbing pad, removing light rust, paint, and other
buildup from the work surface.
DUST bAG
The dust bag collects dust through punched holes in the
sandpaper and hook-and-loop pad, keeping dust to a
minimum.
UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

No Load Speed .................................. 12,500 r/min. (RPM)
Input ................................. 120 V, 60 Hz, AC only, 1.2 Amp
GRIPZONE
The sander features GripZone™ overmold technology for
improved comfort with a positive grip.
PAPER PUNCH
The paper punch template punches sandpaper for proper
fit and alignment.
QUICk CHANGE HOOk-AND-LOOP PAD
The hook-and-loop design allows for quick change of sand-
ing sheets and scrubbing pads. It also enables you to easily
clean and reuse them.
TRI-FLEX PAD DESIGN
The top two-thirds of each sanding sheet is a detachable
triangle that can be rotated to extend sheet life and promote
even wear.

ASSEMbLy

PACkING LIST
5-1/2 in. Corner Cat
60-grit Sanding Sheet (2)
120-grit Sanding Sheet (3)
240-grit Sanding Sheet (2)
Heavy-duty Scrubbing Pad (Red)
Light Scrubbing Pad (White)
Polishing Pad (Gray)
Dust Bag
Paper Punch
Tool Bag
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
7 - English
OVERMOLD TECHNOLOGy
™
Compact Finish Sander
®