Troubleshooting - AEG FSE32407Z Notice D'utilisation

20 www.aeg.com
installed in the duct (A) with the
mounting elements (C).
B
1. Pull out the upper basket.
2. To detach the spray arm, turn the
mounting element clockwise.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.

11. TROUBLESHOOTING

WARNING!
Improper repair of the
appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
The majority of problems that may
occur can be solved without the need
A
C
4. To install the spray arm back, insert
the mounting element in the spray
arm and fix it in the duct by turning it
counterclockwise. Make sure that the
mounting element locks into place.
to contact an Authorised Service
Centre.
Refer to the below table for information
on possible problems.
With some problems, the lights related to
MY TIME selection bar flash
intermittently to indicate a malfunction
and the alarm code.