General Information & Overview - L.B. White Foreman CI230 Manuel Du Propriétaire Et Instructions

Fournaise gainable bicarburants à chauffage indirect. soutirage de la vapeur des gaz de pétrole liquéfiés ou du gaz naturel
Masquer les pouces Voir aussi pour Foreman CI230:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

General Information
This Owner's Manual includes accessories commonly
used on this heater. These accessories must be
ordered separately.
When calling for technical service assistance, or for
other specific information, always have model
number and serial number available. This information
is contained on the dataplate.
This manual will instruct you in the operation and care
of your unit. Have your installer review this manual
with you so that you fully understand the heater and
how it functions.
Contact your local L.B. White distributor or the
L.B. White Co., LLC for assistance, or if you have
any questions about the use of the equipment or its
application.
The L.B. White Co., LLC has a policy of continuous
product improvement. It reserves the right to change
specifications and design without notice.
Foreman Ductable Dual Fuel Indirect-Fired Heater
Overview
The heater is equipped with a burner assembly. The
assembly includes an electronic igniter, solenoid
valves, and burner head with orifice. When the heater
is turned ON, the igniter will spark, with gas delivered
through the solenoids to the burner orifice. Ignition
will occur.
The burner will heat the heat exchanger. After a
predetermined time frame has passed, a fan control-
ler will start the blower motor, and blow cool air over
the heat exchanger. The cool air will be preheated by
passing over the heat exchanger, with warm, dry air
delivered the area to be heated.
Combustion by- products created during the heating
process will be transferred up a vent stack directly to
the outside, thereby providing only clean, dry air to
the heated area.
When the heater is turned OFF, the solenoid valves
will close cutting off gas to the burner. The fan
controller will continue to run the blower motor for
a predetermined period of time to allow the heat
exchanger to cool down. After this time frame has
elapsed, the fan controller will disconnect power to
the blower motor, thereby shutting the blower motor
down completely.
Owner's Manual • Foreman
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Foreman ci500Foreman ci750

Table des Matières