Installation; Extra ® /Mobile ® (Without Motion Detector) - Leitronic AG bebetelEXTRA Manuel D'utilisation

4

Installation

®
4.1 EXTRA /MOBILE
1. Insert 9 V battery into compartment on rear side of device
Note: Disconnect the telephone-line before opening battery compartment. This is to avoid contact
with dangerous telephone network voltage!
2. Plug the AC-adapter into mains socket and then into one of the
3. Connect telephone line to
Plug-in either the landline telephone cord 3a or your mobile connection cord 3b, never both cords
at the same time.
3a) Land line mode: (all models): Plug enclosed cord into -LINE jack and into the wall outlet:
UK: Using the delivered cord.
US/Spain/Portugal: using RJ11-cord directly.
Other: using country specific telephone adapter
3b) Mobile mode with bébételMOBILE
1.3. To avoid waking up your child switch the mobile to silent mode.
cable
4. Set function switch to PROG and enter desired telephone number using keypad
5. Set sensitivity switch to the desired level (LOW/MED/HIGH)
6. Set function switch to ON
After power on bébétel
room without triggering a call. If you want to skip this period immediately: Press key
monitoring mode, and test response sensitivity.
44
®
(Without motion detector)
9
-LINE jack:
®
only: Connect mobile phone using the appropriated connection
®
bébétel
is now ready
®
remains inactive for a waiting period of two minutes so you can leave your
8
EXT connectors of the alarm unit.
8.2
6.6.1
9
to activate