Compliance With Standards; Before First Use; Installing The Coffeemaker - Philips Senseo Sarista HD8030 Mode D'emploi

Masquer les pouces Voir aussi pour Senseo Sarista HD8030:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EnglisH
6
4203_000_7242_2_DFU-Luxury_A5_v1.indd 6
Do not overfill the jug.
-
-
Always check the inside of the jug before use. If you detect any cracks
or damage, do not use the jug.
-
Be careful not to drop the jug. If the jug has fallen while full, do not
pour out the contents to prevent injury. The inner wall of the jug may
be broken due to the fall.
-
To prevent scalding, always pour contents into a cup and do not drink
directly from the jug.
-
This coffeemaker is intended for normal household use only. It is not
intended for use in environments such as staff kitchens of shops, offices,
farms or other work environments. Nor is it intended to be used by clients
in hotels, motels, bed and breakfasts and other residential environments.
-
Never use accessories or parts made by other manufacturers or that
have not been specifically recommended by Philips. Your guarantee will
become invalid if you use such parts or accessories.
Never fill the water tank with warm, hot or sparkling water, as this may
-
cause damage to the water tank and the coffeemaker.

Compliance with standards

-
This Philips coffeemaker complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to
the instructions in this user manual, it is safe to use based on scientific
evidence available today.

Before first use

installing the coffeemaker

Never install the coffeemaker in environments where the temperature
may drop to 0° or below. If the water inside the coffeemaker freezes, the
coffeemaker will be damaged.
Note: It is normal that there are some traces of coffee and water in the
coffeemaker when you use it for the first time. This is because the coffeemaker
has been tested in the factory to make sure that it is in perfect working order.
We guarantee that your coffeemaker is brand-new.
1
Remove all packaging material from the coffeemaker.
2
Place the coffeemaker on a table or worktop away from the tap, the
sink and heat sources.
3
Leave a free space of at least 15cm above, behind and on both sides
of the coffeemaker.
1/9/13 1:37 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Senseo sarista hd8010

Table des Matières