Philips Senseo Sarista HD8030 Mode D'emploi page 26

EnglisH
26
Light signal
CALC CLEAN light and
activity light flash slowly.
CALC CLEAN light
flashes quickly and 'water
tank empty' light lights up.
Problem
The coffeemaker seems
to be leaking and or
water ends up in the
drip tray.
When to descale the
coffeemaker.
The coffeemaker does
not work.
4203_000_7242_2_DFU-Luxury_A5_v1.indd 26
Meaning Action
The coffeemaker is See chapter 'Descaling the coffeemaker'.
descaling.
Empty the bowl, rinse and fill the water tank and
This happens during
the descaling cycle. continue with the rinsing cycle.
Empty the bowl, rinse and fill the water tank and
This happens during
the rinsing cycle. continue with the rinsing cycle. Press the 1-cup
button and the 2-cup button simultaneously for
1 second to start the second rinsing cycle.
Troubleshooting
This chapter summarises the most common problems you could encounter
with your coffeemaker. If you are unable to solve the problem with the
information below, visit www.philips.com/senseo-sarista/support for
a list of frequently asked questions or contact the Consumer Care Centre
in your country. On this site you can also watch instruction movies on how
to use, clean and descale your Philips SENSEO
Possible solution
This is normal. To guarantee the perfect cup of coffee the coffeemaker uses
water to rinse the brewing system. This happens during the automatic rinsing
cycle when the coffeemaker has not been used for a longer period of time
(20 hours) and before and after brewing each cup. A part of the water flows
through the internal system directly into the drip tray. Empty the drip tray
regularly and at least before brewing a jug of coffee.
You need to descale the coffeemaker when the CALC CLEAN light lights up
continuously. When the CALC CLEAN light lights up depends on the usage
frequency. When you brew coffee very often, you have to descale sooner
than when you brew coffee less often.
Plug in and switch on the coffeemaker.
Make sure that the voltage indicated on the coffeemaker corresponds to the
local mains voltage.
Fill the water tank with water.
If the activity light flashes quickly, make sure that the brewing unit is inserted
correctly and that the service door is closed properly (see chapter 'Cleaning
the brewing unit').
If the CALC CLEAN light flashes quickly, you switched off the coffeemaker
during the descaling procedure (see chapter 'Descaling the coffeemaker').
Restart the descaling procedure.
® SARISTA coffeemaker.
1/9/13 1:38 PM