Main Menu; Switching To Main Menu; Exit From Main Menu; Menu Item: Track - Bosch CRR 320 Consignes D'utilisation

en 28 | CRR 320 | Main menu
8.

Main menu

8.1

Switching to main menu

Switch on the CRR 320 and wait for automatic calibra-
tion to be completed. Then use the navigation keys
or to switch to the main menu and select the menu
item. Confirm selection with the acknowledgement key
.
Fig. 2: Menu item: Switching to main menu
Menu item Function
Track Only the current measured va-
lue is ever retained
Peak The highest measured va-
lue is displayed and stored
Preset Limit value measurements = Measu-
rement with specified parameters
Work schedule This permits the consecutive exe-
cution of several parameter sets
Info Display of battery status as
well as date and time
Memory Display of data contained in the memory
Quick start Short parameter program-
ming (relative entry (%))
8.2

Exit from main menu

Press the termination key
menu without saving the changes.
8.3

Menu item: Track

Use the navigation keys
main menu. In the main menu, select the menu item
"Track" with the navigation keys
Confirm selection with the acknowledgement key
Fig. 3: Menu item: Track
|
0 986 629 502 2015-02-16
to exit from the main
or to switch to the
or .
.
8.4

Menu item: Peak

Use the navigation keys
main menu. In the main menu, select the menu item
"Peak" with the navigation keys
Confirm selection with the acknowledgement key
Fig. 4: Menu item: Peak
8.5

Menu item: Preset

Use the navigation keys
main menu. In the main menu, select the menu item
"Preset" with the navigation keys
Confirm selection with the acknowledgement key
A sub-menu is displayed.
Fig. 5: Menu item: Preset
Designation Function
Md Torque measurement with spe-
cification of limit values
Md - Wkl Torque measurement with angle mea-
surement limit value monitoring
Wkl - Md Angle measurement with torque mea-
surement limit value monitoring
or to switch to the
or .
.
or to switch to the
or .
.
Robert Bosch GmbH