Lenz Digital Plus LK200 Mode D'emploi page 28

28 Information LK200
6 Monitoring the reverse-loop area with occupancy detectors LB100/LB101
If you want to monitor the reverse-loop area with an occupancy detector, connect the LB100/LB101
to the output of the LK200.
LB100
Lenz Elektronik GmbH D 35398 Giessen
IN J K J K OUT
OUT
IN
Figure 5: Connecting the LB100 to the LK200
Figure 5 shows the connection to the right of the two occupancy detectors of the LB100. Of course,
you can also use the left detector. Figure 6 shows the connection to the occupancy detector LB101.
Here, you can also choose between the left and the right detector. Moreover, you can use the free
detector of the LB101 to monitor a different part within the reverse-loop area.