Removing The Shifter - Whirlpool Maytag MVW6200KW Manuel Technique

4. Slide the hinge back and lift it to remove.

Removing the Shifter

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
washer.
Failure to do so can result in back or other injury.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Use cardboard or padding to lay washer on the front cabinet.
4. Remove the two (2) mounting screws and then remove the pulley cover.
40
FOR SERVICE TECHNICIAN'S USE ONLY
5. Remove the harness from the shifter.
6. Remove the two (2) mounting screws as shown in below figure.
7. Lift out the shifter.
DO NOT REMOVE OR DESTROY