Whirlpool Maytag MVW6200KW Manuel Technique page 44

As an alternative to the previous steps, the belt, motor, splutch, shifter, and
capacitor may also be removed along with the gearcase as outlined below:
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the basket. See the section
4. Use cardboard or padding to lay washer on the front cabinet.
5. Unplug the harness from the motor.
6. Unplug the harness from Shifter.
7. Unplug the harness from the capacitor.
W11416395B
Removing the Basket.
©2020 All rights reserved. Used under license in Canada.
®/TM
8. Remove the four (4) mounting bolts and pull the gearcase out of the tub .
NOTE: The tub and gearcase has eight (8) mounting holes. Only four (4)
are used. If they strip out during reassembly, the other holes can be used to
re-mount the gearcase.
10/20