Removing The Lid And Hinge - Whirlpool Maytag MVW6200KW Manuel Technique

12. Slide the lid lock to the left and then down to remove.
Removing the Lid and
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Top Load Washer Glass Lid Removal
1. Remove the four (4) TORX T20 screws holding the lid to the hinges.
DO NOT REMOVE OR DESTROY
FOR SERVICE TECHNICIAN'S USE ONLY
Hinge
2. Lift the lid up and off of the hinges.
Top Load Washer Hinge Removal
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Complete the steps 1-8 from section Removing the Console.
2. Complete the steps 1-2 from section Remove the Lid.
3. Remove the 1/4" (6 mm) hex head screw holding the hinge in place.
39