What To Do If - IKEA BEJUBLAD Mode D'emploi

ENGLISH

What to do if...

If there is a fault, first try to find a solution to the
problem yourself. If you cannot find a solution
to the problem yourself, contact an authorized
service center.
PROBLEM
Appliance not stable
Appliance is not in horizontal position
Performance in terms of oil capture are
not satisfying
Appliance does not work
The light does not work
Before contacting the Authorized Service Centre:
Switch the appliance on again to see if the problem has disappeared. If not, switch it off again and
repeat the operation after an hour.
If your appliance still does not work properly after carrying out the checks listed in the troubleshooting
guide and switching the appliance on again, contact the Authorized Service Centre, clearly explaining
the problem and specifying:
• the type of fault;
• the model;
• the type and serial number of the appliance (given on the rating plate).
POSSIBLE CAUSE
The appliance is not correctly installed
The appliance is not correctly installed
Oil and grease on metal filters
The appliance is not correctly connected
The LED is broken
If you operated the appliance wrongly, or
the installation was not carried out accord-
ing to the Assembly instructions, the visit from the
Authorized Service Centre technician may not
take place free of charge, even during the
warranty period.
SOLUTION
Follow the Installation instruction enclosed to
the appliance.
Follow the Installation instruction enclosed to
the appliance.
Follow the cleaning frequency of filters as
described in the user manual
Verify that the main cable is connected to
the motor group or the plug is connected
to the socket
For replacement, contact the Authorized
Service Centre.
9