IKEA BEJUBLAD Mode D'emploi page 6

Masquer les pouces Voir aussi pour BEJUBLAD:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Use
• Switch off or unplug the appliance from
the mains supply before carrying out any
maintenance work.
• The top of the hood must not to be used as
a shelf.
• The extractor hood has been designed
exclusively for domestic use to eliminate
kitchen smells.
• Never use the hood for purposes other
than for which it has been designed.
• Never leave high naked flames under the
hood when it is in operation.
• Adjust the flame intensity to direct it onto
the bottom of the pan only, making sure
that it does not engulf the sides.
• Deep fat fryers must be continuously
monitored during use: overheated oil can
burst into flames.
The hood has been designed to be installed
and used either as a "Exhausted model", or as a
"Recirculation model".
Exhausted model (see symbol
installation booklet)
Cooking steam is sucked and channelled
outside the house through a discharge duct
(not supplied), fitted to the hood steam
outlet.
Ensure that the discharge duct is correctly
fitted to the air outlet, unit using an
appropriate connection system.
Important: if already installed, remove the
charcoal filter/s.
Recirculation model (see symbol
in installation booklet)
The air is filtered through one or more the
charcoal filters, and then resent into room.
Important: Ensure appropriate air
circulation around the hood.
Care and cleaning
• Activated charcoal filter are not
washable and cannot be regenerated,
and must be replaced approximately
every 4 months of operation, or more
frequently with heavy usage.
• Grease filters must be cleaned every 2
months of operation, or more frequently
for particularly heavy usage, and can be
washed in a dishwasher.
• Clean the hood using a damp cloth and
a neutral liquid detergent.
Important: If the hood is supplied without
charcoal filters and installed on recirculation
mode, these must be fitted before the hood
can be used. Filters are available in shops.
The hood should be installed away from
in
particularly dirty areas, windows, doors and
heat sources.
The accessories for wall fixing are not
included because wall made of different
materials require different types of fixing
accessories. Use fixing systems suitable for
the walls of your home and the weight of
the appliance. For more details, contact a
specialized dealer.
Keep this booklet for future consultation.
6

Publicité

Table des Matières
loading

Table des Matières