Troubleshooting Guide - Hatco Glo-Ray GPS Série Manuel D'installation Et D'utilisation

English
WARNING
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
Symptom
Unit too hot.
Unit not hot enough.
Unit not working at all.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please contact the nearest Authorized Hatco Service Agency or Hatco for
assistance. To locate the nearest Service Agency, log onto the Hatco website at www.hatcocorp.com, select the Support pull-
down menu, and click on "Find A Service Agent"; or contact the Hatco Parts and Service Team at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: support@hatcocorp.com
Form No. GRSM-0318
Probable Cause
Thermostat control set too high.
Thermostat control stuck in the "on" position. Contact Authorized Service Agent or Hatco
Unit plugged into an incorrect power supply. Verify with qualified personnel that power
Thermostat control set too low.
Location of unit is susceptible to air currents
(air conditioning ducts or exhaust fans).
Unit not plugged in.
Unit not turned on.
Power On/Off (I/O) switch is not functioning. Contact Authorized Service Agent or Hatco
Heating element is burned out.
Thermostat control is defective.

TROUBLESHOOTING GUIDE

ELECTRIC SHOCK HAZARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
Adjust thermostat control to a lower setting.
for assistance.
supply matches unit specification.
Adjust thermostat control to a higher setting.
Block air currents or relocate unit.
Plug unit into proper power supply.
Move Power On/Off (I/O) switch to the On (I)
position.
for assistance.
Contact Authorized Service Agent or Hatco
for assistance.
Contact Authorized Service Agent or Hatco
for assistance.
19
WARNING
Corrective Action