Honeywell Miller 650T/UGK Manuel D'utilisation page 16

The personal suspension system, widely used in the
window washing and painting industries, is designed
to lower and support a worker while allowing a hands-
free work environment. The following are components typical of a
suspension system:
1. Personal Protective Gear:
2. Connecting Device:
3. Anchorage Connector: Cross-Arm Strap/Carabiner
to arrest a free fall, a back-up fall arrest system must be used in
system will only activate should the worker experience a fall.
Us er In stru ctio ns - Engli sh
This fall arrest
system. This system is primarily used where workers
must be lowered into tanks, manholes, etc., and may
require retrieval from above should an emergency
occur. The following shows a typical personal retrieval
system:
1. Personal Protective Gear:
2. Connecting Device:
3. Anchorage Connector:
16
known as a personal retrieval/fall arrest