Miele BSK 18 Notice De Montage page 4

Produktgruppe 512
4 von 20
en
Parts required
Quantity Mat. no.
1 09079490
Note
This service and repair work should only be carried out by a suitably qualified electrician (with specialist
training, knowledge and experience, and recent related work experience) in accordance with all appropriate
local and national safety regulations.
Commissioning, servicing, modification, testing and maintenance of electrical appliances should only be
carried out in accordance with all appropriate legal requirements, accident prevention regulations and valid
standards. All regulations of the appropriate utility supply companies and standards relating to safety (not
limited to electrical safety) are to be complied with.
Danger!
Even with the machine switched off, mains voltage may be applied to some components.
Before any service work is commenced, the machine must be disconnected from the mains. Suitable
measurements must be made to ensure that this is the case.
A general visual check and risk evaluation should always be carried out.
Incorrect conversion or service work can be dangerous (risk of fire, electric shock, etc.).
Danger!
Correct earthing function can be deactivated if casing parts are incorrectly assembled.
Correct earthing function must be ensured when refitting the casing.
Carry out appropriate electrical safety checks.
Danger!
During fitting, all accessible conductive parts that are not connected to the earth must not have any link to
earth (strengthened double insulation).
To confirm this, insulation resistance and touch current measurements must be carried out.
Note
Payment system kit BSK 18 for PW 6107, PW 6137, PW 6167, PW 6207
1 wiring harness N1L_ST18; X1-1
1 cable strain relief
1 wiring diagram - PW 6107, PW 6137, PW 6167, PW 6207
Fitting instructions - Payment system connection - PW 6107, PW 6137, PW 6167, PW 6207,
Mat. no. 09082680
List of illustrations:
Wiring harness N1L_ST18; X1-1
29.04.2011 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
Designation
Payment system kit BSK 18 for PW 6107, PW 6137, PW 6167,
PW 6207
M.-Nr. 09082680