Baxtran S75 Manuel D'utilisateur page 126

5. SETTING
Click to enter parameter setting page
NO. PERSONNEL
1 Technician
2 Admin
3 Operator
If scale is in approval mode, it requires to press CAL switch(located on the bottom of scale) to enter metrological parameter set-
tings. Breaking the seals implies losing the product's certification.
126
OPERATION
input technician and password, you could Access all parameters and settings
Can Access parameters except weighing settings and calibration. If requires, need to login as
admin and press CAL switch.
No authority, only allows to do weighing operations.
Note: Please don´t let out user name and password.
USER'S GUIDE S75 EN EN