General Power Tool Safety Warnings; Sander Safety Warnings - Makita BO4900V Manuel D'instructions

ENGLISH
(Original instructions)
1 Speed adjusting dial
2 Lock button
3 Switch trigger
4 Clamp lever
5 Conventional type of abrasive
paper with pre-punched holes
6 Pad for conventional type of
abrasive paper
7 Punch plate
SPECIFICATIONS
Model
Pad size ..........................................................115 mm x 229 mm
Abrasive paper size ........................................115 mm x 280 mm
–1
Orbits per minute (min
Sanding stroke rate (min
Overall length .................................................289 mm
Net weight ......................................................2.9kg
Safety class ....................................................
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for the sanding of large surface of
wood, plastics and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.

General power tool safety warnings

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
4
Explanation of general view
8 Conventional type of abrasive
paper without pre-punched
holes
9 Hook-and-loop type of
abrasive paper with
pre-punched holes
10 Pad for hook-and-loop type of
abrasive paper
11 Pad
12 Screws
13 Screwdriver
BO4900V
) ................................4,000 – 10,000
–1
).............................8,000 – 20,000
BO4900
115 mm x 229 mm
115 mm x 280 mm
10,000
20,000
289 mm
2.9kg
/II /II

SANDER SAFETY WARNINGS

1. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
2. Hold the tool firmly.
ENE052-1
3. Do not leave the tool running. Operate the tool
only when hand-held.
4. This tool has not been waterproofed, so do not
use water on the workpiece surface.
5. Ventilate your work area adequately when you
ENF002-1 perform sanding operations.
6. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
7. Use of this tool to sand some products, paints
and wood could expose user to dust containing
hazardous substances. Use appropriate respira-
tory protection.
GEA010-2
8. Be sure that there are no cracks or breakage on
the pad before use. Cracks or breakage may
cause a personal injury.
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity with
product (gained from repeated use) replace strict
adherence to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
14 Groove
15 Front fixing cardboard
16 Paper dust bag
17 Claws
18 Upper part
19 Guide
20 Notch
21 Push button
22 Dust nozzle
23 Hook
24 Dust bag
BO4901
115 mm x 229 mm
115 mm x 280 mm
10,000
20,000
289 mm
2.8kg
/II
GEB021-4