Reception Of The Machine - ITV IQ400TRIE Mode D'emploi

1| RECEPTION OF THE MACHINE

Inspect the outside packing. In case of damages, MAKE THE CORRESPONDING CLAIM TO
THE CARRIER.
To confirm the existence of damages, UNPACK THE MACHINE IN THE PRESENCE OF THE
CARRIER and state any damage on the equipment on the reception document, or on a separate
instrument. As from May 1, 1998, we complie with the European regulations on management of
packing and packing waste, inserting the "Green Dot Label" on all their packages.
Always state the machine number and model. This number is printed on three locations:
1.1 PACKING
On the outside, it contains a label with the manufacturing number (1).
1.2 EXTERIOR OF THE EQUIPMENT
(1)
On the back of the equipment, there appears a label
with the same characteristics as the previous one (1).
1.3 NAMEPLATE
On the back of the machine.
Check that in interior of the machine the
installation kit is complete and comprises:
- ¾ gas pipe, filters and manual.
- 22 mm drain hose in models 45 and 85
and in water cooled machines
- In some models, shims are included.
- Warranty and serial number.
CAUTION: ALL PACKING ELEMENTS (plastic bags, carton boxes and wood pallets)
SHOULD BE KEPT OUTSIDE THE REACH OF CHILDREN, AS THEY ARE A SOURCE OF
POTENTIAL HAZARD.
2| INSTALLATION
THIS ICE MAKER IS NOT DESIGNED FOR OUTDOOR OPERATION.
An incorrect installation of the equipment may cause damages to individuals, animals or
other materials, being the manufacturer not responsible for such damages.
CAUTION:
The machines are designed to operate at room temperature between 5ºC (41ºF) and 43ºC
(109.40ºF), with inlet water temperature between 5ºC (41ºF) and 35ºC (95ºF).
The reduction motor is excessively forced if operated under the minimum temperatures. Above the
maximum temperature, the life of the compressor is shortened and the production is substantially
less.
Do not place anything over the maker or facing the front louver.
English_IQ_4