Saving Energy; Operating - Dometic CFX3 Serie Guide Rapide

Operation
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible fail-
ure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
3 Operation
3.1

Saving energy

• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket according to its position on
delivery.
• On a regular basis, make sure the lid seal still fits properly.
3.2

Operating

To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the cooling device as often and for as long as nec-
essary. Store the foodstuff in such a way that the air can still circulate well.
• Adjust the temperature to the quantity and type of the foodstuff.
• Foodstuff can easily absorb or release odor or taste. Always store foodstuff covered or in closed contain-
ers/bottles.
Scope of delivery: fig. 1
Proceed as shown:
• Connecting to a battery: fig. 2
• Connecting via extended DC hard-wiring: fig. 3
• Connecting to an AC power supply: fig. 4
• Switching on the cooler: fig. 5
• Switching off and storing the cooler: fig. 6
• Display overview: fig. 7
• Locking/unlocking the display: fig. 8
• Selecting the temperature units: fig. 9
• Setting the temperature: fig. 0
• Using the battery monitor: fig. a
• Setting the display's brightness: fig. b
• Switching on or off the compartments: fig. c
• Switching on or off the icemaker: fig. d
16
CFX3
EN