Network Setting On Station; Connecting To Two Different Networks - Philips WACS7000 Manuel D'utilisation

If there is no DHCP
Select Static and assign an IP address and subnet
mask as prompted using the alphanumeric keys
(see 4.4 Preparation: Using Alphanumeric
Keys).
5
As prompted, select Yes to apply the settings
➜
The Center is connected to the external
wired network
➜
On the display, the icon
External wired network
Internet
Wireless Base Station 11g T Wireless Base Station 11g True T rue Turbo urbo
Wireless Wireless Modem PC Modem PC Power Power
DSL modem
Applicable cases: Has wired network
(Hub/Switch/Router) in home already.

11.3.2 Network setting on Station

1
Check that the network device is switched on
and the firewall (if available) is switched off
2
Connect the supplied Ethernet cable to the
Ethernet ports on the network device and the
Station
3
On the Station, search for networks
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2
and 2 to enter Settings, followed by
Network and Wired
c. Press 2 to continue.
4
Follow Steps 4 in the above Network setting On
Center
5
As prompted, select Yes to apply the settings
is changed to
PC (UPnP device)
Router/Hub/Switch
ETHERNET
for illustration only
11. Network setting
➜
The Station is connected to the external
wired network
➜
On the display, the icon
External wired network
Internet
Wireless Base Station 11g True T Wireless Base Station 11g T rue Turbo urbo
Wireless Wireless Modem PC Modem PC Power Power
DSL modem Router/Hub/Switch
ETHERNET
Applicable cases: Has wired network
(Hub/Switch/Router) in home already.
Helpful hint:
– You can connect the Center or Station directly to
your PC using the supplied Ethernet cable and
the Wireless Audio Device Manager (WADM) in
the by-packed PC Suite CD. For details, see the
manual Connect to your PC.
11.4 Connecting to two different
networks
WACS7000 can be added into two different
networks via wired and wireless network port.
Please refer to the advanced network setting
section. But you must be careful that the IP
addresses of the two network ports cannot be in
one subnet.
Two external networks
Internet
Router/Hub/Switch
Wireless Base Station 11g True T Wireless Base Station 11g T rue Turbo urbo
Wireless Wireless Modem PC Modem PC Power Power
Access point
DSL modem
PC (UPnP device)
Applicable cases: Has two networks
IMPORTANT!
– Once the WAC7000 Center is added
into the Wi-Fi network, all Wi-Fi Ad-
Hoc connections with the WAC7000
will be shut down.
is changed to
PC (UPnP device)
for illustration only
ETHERNET
for illustration only
55