Network Setting; Adding Station To Center's Wi-Fi Network - Philips WACS7000 Manuel D'utilisation

11. Network setting

You can add WACS7000 Center and/or Station to your existing home network. Set your
network according to your needs as follows:
Type
Simple Network Setting
Advanced Network Setting
Expert Network Setting
11.1 Adding Additional Station to
the Center
Up to 5 Stations can be connected to the
WAC7000 Center.When adding a Station to the
Center's Wi-Fi network, you can play the Center's
music library on the Station or move music
playback between the Center and Stations (see
6.HD). To add a Station to the Center's Wi-Fi
network, proceed as follows:
On the Center
1
Check that WAC7000 Center is in HD source
2
Select Add New Station
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. Press 3 or 4 and 2 to select Add New
Station
➜
You will enter Installation Mode. Searching for
the new station starts
➜
Playback stops on the previously associated
Station if you are playing the HD source
52
What you want
Adding Additional Station to the Center
Connecting to PC for configuration and
management
Connecting to internet for Gracenote
Internet service
Connecting to external Wi-Fi network
Connecting to external wired network
Connecting to two different networks
Section 11.1
See Connect to PC
section A
See 12.Gracenote CD
Information
Section 11.2
Section 11.3
Section 11.4
Helpful hints:
– If there are 5 stations connected, Add New
Station option will not present. In this case,
please delete a station first, and then to add
new stations
On Stations
3
Enter Installation Mode
a. Remove the power plug of the Stations, and
then connect them to the power supply again
➜
Connecting to Center appears
b. On the remote control, press MENU to
enter Installation Mode
➜
HD screen appears if the Station is connected
to the Center
➜
The Center and the Stations are now in the
same Wi-Fi network
On the Center
4
Press STOPÇ when all the Stations
are found.
Go to
1