Playing Music From The Usb Device; Transferring Music To The Usb; Playing A Portable Audio Player - Philips WACS7000 Manuel D'utilisation

Masquer les pouces Voir aussi pour WACS7000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Organize your MP3/WMA files in different
folders or sub-folders as needed.
Helpful hints:
– "Others" is shown as an album if you have not
organized your MP3/WMA files into any albums
on your disc.
– Make sure that the file names of MP3 files end
with .mp3. and the file names of WMA files end
with .wma.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for CD burning/
conversion.Visit www.microsoft.com for details
about Windows Media Player and WM DRM
(Windows Media Digital Rights Management)
10.1.2 Playing music from the USB
device
1
Check that the USB device is properly connected
to the Center or Station
(see 3.3.2 Installation: Connecting a USB mass
storage device )
2
Press SOURCE once or more times to select
USB
The screen shows "USB direct"
– No USB Device Present appears if the USB
device is not supported by the Center or
Station
– File system not supported appears if
unsupported file formats are used on the USB
device
Empty Folder appears if no audio file is found
on the USB device
3
Play audio files on the USB as you do with the
albums/tracks on a CD (see 7.CD).
10. External sources
Helpful hint:
– Due to compatibility reasons, the album/track
information may differ from what will be
displayed through the flash player's music
management software.

10.1.3 Transferring music to the USB

device
IMPORTANT!
– Recording is permitted only if there is
no infringement of copyrights or any
other rights of third parties.
– For CDs encoded with copyright
protection technologies used by some
record companies, recording will be
restricted.
– The making of unauthorized copies of
copy-protected material, including
computer programmes, files, broadcasts
and sound recordings, may be an
infringement of copyrights and
constitute a criminal offence.This
equipment should not be used for such
purposes.
1
Check that the USB device is properly connected
to the Center.
2
On the Center, press SOURCE once or more
times to select HD (or press HD on the remote
control).
– If it is in HD playing mode, press STOP to
stop playing
3
Press the navigation controls 3 or 4 and 2 to
select your option and enter its corresponding
list of tracks (if necessary)
49

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wacs7005Wacs7012

Table des Matières