Placing Center And Station; Important; Setting Up Wi-Fi Connection Between Center And Station - Philips WACS7000 Manuel D'utilisation

3.1 Placing Center and Station

With detachable stands and by-packed wall
mounting kits, the WACS7000 Center and
Station can be placed in two ways: on desktops
using detachable stands or on walls without using
the stands.
(on desktops using stands)
(on walls without using stands)
To learn more about wall mounting, see 16.1
Appendix: How to mount your Center and
Station onto walls.

IMPORTANT!

– Before you decide where and how to
place both the Center and Station, try
the Wi-Fi connection and rear
connections to find a suitable location.
3. Installation
3.2 Setting up Wi-Fi connection
between Center and Station
Wi-Fi connection starts automatically when you
power up both the WAC7000 Center and
WAS7000 Station
1
The first time you set up a Wi-Fi connection,
place the Center and Station side by side on a
flat and firm surface.
2
a. Connect the Center to power supply
b. Connect the Station to power supply
➜
Auto installation/connection starts
➜
HD screen appears on the Center
➜
HD screen appears on the Station when the
Station is connected to the Center
3
Unplug the Center and Station. Relocate as
desired.
IMPORTANT!
– Make sure that you have already
powered up the Center before
powering up the Station.
– Avoid installing between thick walls.
The Center and Station should never
be blocked by 2 or more walls.
– Avoid placing the system near to large
metal objects.
– For better Wi-Fi reception, turn the
Wi-Fi antenna, or adjust the location of
the Center and Station.
– Always press and hold ECO/ STANDBY-
ON 2 to switch the set to ECO
POWER (power-saving mode) before
removing its power plug.
19