JVC KW-V50BT Mode D'emploi page 28

BLUETOOTH
Pairing a Bluetooth device from the target device
using a PIN code (for Bluetooth 2.0)
1
Display the <Bluetooth Setup> screen.
On the Home screen:
• You can also display the <Bluetooth Setup>
screen by pressing [ ] on the phone control
screen. (Page 31)
28
2
Change the PIN code.
• If you skip changing the PIN code, go to step
3.
• The PIN code is initially set to "0000".
• The maximum number of digits in the PIN
code is 15.
• Press [Clear] to delete the last entry.
3
Search the unit ("KW-V****") from your
Bluetooth device.
4
Select the unit ("KW-V****") for your
Bluetooth device.
• If the PIN code is required, enter "0000"
(initial).
When pairing is complete, the device is listed on
<Paired Device List>.
• To use the paired device, connect the device
on <Paired Device List>. (Page 29)