Nightlight; Lullaby Function - Philips AVENT SCD520 Mode D'emploi

Nightlight

1 Press the nightlight button Q on the baby unit to switch on the
nightlight.
Q appears on the display of the parent unit.
,
2 Press the nightlight button Q again to switch off the nightlight.
, The nightlight dims gradually before it goes out completely.
Q disappears from the display of the parent unit.
,
Tip: Switch off the nightlight when you operate the baby unit on the non-
rechargeable batteries. This saves power.
Paging the parent unit
If you have misplaced the parent unit and its volume is switched off, you
can use the PAGE button on the baby unit to locate the parent unit.
Note: The paging function only works when the parent unit is switched on.
1 Press the PAGE button on the baby unit.
, The message 'Paging' appears on the display of the parent unit.
The parent unit produces a paging alert tone.
,
2 To stop the paging alert tone, press the PAGE button again or press
any button on the parent unit.

Lullaby function

1 Press the play/stop button E on the baby unit to play the currently
selected lullaby.
, The lullaby starts to play and repeats continuously.
2 To stop the lullaby, press the play/stop button E on the baby unit
again.
ENGLISH
17