Ebro EP 501 B Guide Rapide page 18

→
Set up the multi-part assembly bridge* to suit the actuator.
→
Attach the assembly bridge with 4 cylinder head screws
④
circlips to the positioner (see "Fig. 7").
①
④
③
* T he assembly bridge consists of four parts,
which can be adjusted to the actuator by
different arrangements.
Fig. 7: Attaching the assembly bridge (schematic representation)
18
③
english
→
Place positioner with assembly bridge on the swivel actuator and
attach (see "Fig. 8")
and
Fig. 8: Swivel actuator attachment
Type EP 501 B
Attachmentandinstallation