Ebro EP 501 B Guide Rapide page 17

Type EP 501 B
Attachmentandinstallation
8.2.1 Installation
WARNING!
Risk of injury from improper assembly!
▶ Assembly may be carried out by authorized technicians only
and with the appropriate tools!
Risk of injury from unintentional activation of the system and
uncontrolled restart!
▶ Secure system against unintentional activation.
▶ Following assembly, ensure a controlled restart.
Procedure:
→
Determine the attachment position of the positioner:
- parallel to the actuator or
- rotated by 90° to the actuator.
→
Determine the basic settings and the direction of rotation of the
actuator.
Anti-twist safeguard:
Note the flat side of the axle!
One of the setscrews must be situated on the flat side of
the axle as an anti-twist safeguard (see "Fig. 6").
①
→
Connect the adapter to the axle of the positioner and secure
with 2 setscrews.
→
Secure setscrews with self-locking nuts.
Rotation range of the position sensor:
The maximum rotation range of the position sensor is 180°.
The axle of the positioner may be moved within this range
only.
180°
maximum
swivel range
Flattened axle
Fig. 6: Rotation range / anti-twist safeguard
english
The rotation movement of the
rotary actuator must be within
the position sensor rotation range
of 180°.
17