Power Supply - Samsung WB09H7 Serie Manuel D'utilisation

Power supply

WARNING: To reduce the risk of fire, electric shock, personal injury, or property damage
when using the washer, follow these basic precautions:
• Connect the washer to an individual branch circuit that:
• Has a 120 V /60 Hz, 15 AMP fuse or circuit breaker.
• Will serve only the washer.
• Do not use an extension cord.
• Use only the power cord that comes with your washer.
Grounding
WARNING: To reduce the risk of fire, electric shock, personal injury, or property damage
when using the washer, follow the basic precautions.
For safety, the washer must be grounded.
• The washer must be properly grounded. After a malfunction or breakdown of the machine,
proper grounding will reduce the risk of electric shock by providing minimum resistance to the
electric current.
• The washer comes with a power cord that has a three-prong grounding plug for use in a
properly installed and grounded socket.
• Do not modify the plug that comes with the washer. If it does not fit the socket, have a proper
socket installed by a qualified electrician.
• Improper connection of the grounding conductor may cause electric shock. To confirm the
washer is properly grounded, check with a qualified electrician or service person.
• To prevent a risk of fire, electrical shock, or physical injury, all wiring and grounding must be
performed in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision
and local codes and ordinances. It is the owner's responsibility to accommodate adequate
electrical power for this product.
• Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
If grounding is not available, add a circuit breaker between the wall socket and the washer
instead.
Untitled-2 9
English - 9
2014-05-26 10:51:09