Step-By-Step Installation - Samsung WB09H7 Serie Manuel D'utilisation

Step-by-step installation

Step 1 - Select a location
Location requirements. For the best performance:
• Install the washer on a solidly constructed floor.
• Never install the washer on a platform or weakly supported structure.
• Allow at least 4 in (10 cm) between the washer and the wall.
• Do not expose the washer to direct sunlight or rain as moisture may damage the electrical
insulation, causing an electrical shock hazard.
• Provide adequate ventilation.
• Do not expose to temperatures below 32 °F or 0 °C.
• Keep away from a heat sources.
• Provide enough space so that the washer doesn't rest on its power cord.
Step 2 – Insert the baffle board
1. Lay the washer down on its side.
• Do not lay the washer down on its front or back.
• While laying the washer down, be careful not to scratch the
surface of the washer.
2. Insert the baffle board into the bottom of the washer along the
guideline.
• The baffle board can reduce noise while the washer operates.
• Once the baffle board is installed, do not remove it unless
necessary.
Untitled-2 12
English - 12
2014-05-26 10:51:10