Getting Started; Control Panel - Samsung WB09H7 Serie Manuel D'utilisation

Getting started

Control panel

1
1. Display
Displays the remaining washing time.
Displays an error message if a problem occurs.
2. Extra Rinses
Press this button to perform a rinse-only cycle or to change the number of rinse cycles.
You can set up to 6 rinse cycles.
3. Soak
Press this button to do a soak wash.
According to the selected cycle, the soak time is determined by the minute.
4. Water Level/Temp.
Press this button to select a water level from High, Mid, and Low.
5. START/PAUSE
Press this button to start or stop an operation.
To change the cycle while the washer is operating, press this button to stop the operation.
Then, change the cycle, and press the button again.
6. POWER
Press this button once to turn on the washer.
Press it again to turn off the washer.
Untitled-2 26
3 4
2
English - 26
5 6 7 8
2014-05-26 10:51:14