Introduction; Operator Specifications; Carton Inventory - CAME FE4024 Instructions D'installation

INTRODUCTION

OPERATOR SPECIFICATIONS

This model is intended for use in vehicular swing gate applications:
Gate Classifications: CLASS I
Main AC Supply: 120 Vac, 50/60Hz
Input Rating: 500 Watts at 120 Vac
Main Supply (Motor): 7.5 Amps at 24 Vdc
Maximum Torque: 320N
Cycle Time: 12 seconds 90 degree open@100% speed
15 seconds 90 degree close @ 100% speed
Gear ratio: 1/1152
Accessory Power: 24 Vac nominal Class II limited to 37W
Maximum Gate Weight/Length: 850 lbs. at 12 ft.
Maximum Opening: 110 degrees

CARTON INVENTORY

Hardware and manual
NOT SHOWN:
Control Panel
Straight Arm
with Guide
Pillar Bracket
Operator (Gearmotor)
Warning Signs (2)
Side Panel
Side Support -
Power Cable
OPERATOR SPECIFICATIONS + CARTON INVENTORY
Daily Cycle Rate AC power: Continuous duty
Ambient Temperature: -20°C to 55°C (-4°F to 131°F)
Fuse Protection Motor: 10 Amp
Fuse Protection Accessories: 2 A
Fuse Protection Control Board: 630 mA-F
Fuse Protection Electrolock: 3.15 A
Fuse Protection Line: 5 A
* The company CAME Cancelli Automatici is ISO 9001:2000 quality certified; it has
also obtained the ISO 14001 environmental safeguarding certification. CAME
engineers and manufactures all of its products in Italy.
This product complies with the following standards: UL-325 and CSA C22.2
NO.247-92.
Side Support -
Transmission Arm
Transmission Arm
7
Side Panel
Cover
Gate Bracket
Drive Arm