IKEA LAGAN Manuel D'utilisation page 20

Masquer les pouces Voir aussi pour LAGAN:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Cleaning the filters
1. Turn the filter counterclockwise to unlock,
then lift it out of the appliance.
2. First pull the filter (A) out of the filter
assembly by compressing it gently. Then the
filters (B) and (C) can be detached.
3. Rinse the filters (A), (B) and (C) with water. If
necessary, use a soft cleaning brush.
4. Re-assemble the filters shown in the figure
below.
C
B
A
5. Insert the filter assembly into position, and
turn it clockwise until it locks.
Make sure the arrows on the filter (B) and (C)
are aligned, as shown in the figure below.
Cleaning the spray arms
We recommend to clean regularly the upper and
lower spray arms to avoid soil to clog the holes.
Clogged holes can cause unsatisfactory washing
results.
1. Pull out the upper and lower baskets.
2. To disengage the upper spray arm from
C
the upper basket, locate the nut in the
center position of the upper arm and turn it
B
counterclockwise to remove.
A
3. To detach the lower spray arm from the
bottom of the appliance, just pull it up to
remove.
20

Publicité

Chapitres

Table des Matières
loading

Table des Matières