Hamilton Beach 50256WV Mode D'emploi page 5

840133000 ENv02.qxd
12-Speed Control Panel*
HI BEAT
GRATE
OFF
PULSE LO WHIP CRUMB
14-Speed Control Panel*
PULSE
STIR AERATE PUREE
GRIND BEAT SHRED
LO
16-Speed Control Panel*
ICE
TM
BREAKER GRATE GRIND BEAT SHRED
OFF
PULSE QUICK STIR AERATE PUREE
CLEAN
LO
2/24/05 10:50 AM Page 5
First select and push a LO or HI power but-
ton then push desired speed button.
PUREE SMOOTHIE
BLEND
The blender will run until you push the OFF
button. The OFF button is also the Ice
CHOP STIR MIX
Breaker
only as long as the button is pushed.
On LO power the blender pulses and on HI
the pulsing action is powerful enough
for crushing ice. See "Crushing Ice."
* NOTE: On some models with 6 to 12
speeds the highest speed may be referred
to as SMOOTHIE or LIQUEFY.
First select LO or HI power using the slide
CRUMB CHOP MIX
switch. Next select a speed button. The
LO
blender will run until the OFF button is
HI
pushed. Ice Breaker
BLEND LIQUEFY FRAPPE
This allows instant control of blending
HI
action. The blender runs only as long as
you hold the switch.
* NOTE: On some models with 14 and
16 speeds, the highest speed may be
referred to as SMOOTHIE or FRAPPE.
This blender offers a LO and HI power range
BLEND LIQUEFY SMOOTHIE
and 16 speeds. First select the power range
HI
by sliding the power switch to LO or HI.
LO
Next push a speed button. The blender will
CRUMB CHOP MIX
operate until the OFF button is pressed. The
HI
OFF button also serves as the IceBreaker
Pulse option. This allows instant control of
blending action. To use this option, select
the LO or HI power range. Then press
IceBreaker
This provides the pulsing action. The blender
stops when the button is released.
* NOTE: On some models with 14 and 16
speeds, the highest speed may be
referred to as SMOOTHIE or FRAPPE.
™ /Pulse button. The blender runs
™ is a pulse operation.
™ / Pulse button and release.
™ /
5