Checking The Packaging - Vitrifrigo SCS Manuel D'utilisation

6 Description of Operation
The refrigerator operates using a refrigerant vapour compression cycle that transfers heat from the inside
to the outside, making it possible to keep the liquid for human consumption stored inside it at a constant,
pre-set temperature.
The refrigerant evaporates by removing the heat from the air via the cold inside walls of the refrigerator
(in contact with the evaporator through which it flows) before entering the compressor.
pressure and temperature of the refrigerant are increased and it is then passed through an air-cooled
condenser, where it is condensed. Lastly, the refrigerant fluid returns inside the evaporator via capillary
and the cycle is repeated.
The internal temperature can be varied using the digital thermostat in the frontal part of the refrigerator.
7 Installation and Use
7.1

Checking the packaging

As soon as the package arrives, inspect it, making sure that it is not upturned and that it has suffered no
damage during transport. Remove the packaging and inspect the unit for damage of any kind.
If there is any doubt as to the integrity of the system parts, do not use the refrigerator.
You must inform your dealer of any damage and/or anomalies not later than 24 hours from the date of
purchase.
7.2 Positioning
The refrigerator has the overall dimensions in millimetres (in inches) shown in the figure below.
EN
Here the