Cleaning; Disposal - Kruger AreaDry 8 Mode D'emploi

Masquer les pouces Voir aussi pour AreaDry 8:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cleaning

The device should be cleaned as follows:
Wipe the case with a damp cloth.
Grasp the top left and right sides of the air filter and pull upwards (see image).
Remove the filter mat.
Rinse the filter mat with water. Dry the filter mat, then reinsert it into the dehumidifier.
Reinsert the air filter from the top.
If the filter is extremely dirty, its inside will also have to be cleaned. Such cleaning can only be
done by a cooling professional. Failure to have the cleaning done can cause the dehumidifier
to malfunction. Any defects that arise from failing to properly service the device will not be
covered by the warranty – in particular if the filter matt has not been cleaned, causing the
device to overheat. We recommend purchasing a service contract to ensure your device runs
smoothly for as long as possible.

Disposal

Because the dehumidifier is filled with a coolant, special disposal requirements apply. Please
contact your dealer or local disposal centre.
59

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Areadry 16Areadry 24302.11301.11300.11

Table des Matières