Dibo ECN-S Mode D'emploi page 38

Chemical cleansing agents (if necessary):
Read always firstly the regulations on the packing of the product.
Never clean with inflammable products.
See for separate care/cleaning of evacuation water.
See for the necessary personal protective equipment (glove, clothing, optical device...).
Observe the instructions of the product conscientiously!
Put the chemicals tank directly beside the machine.
Remove the filter cap and hang the supply- hose in the tank.
Care always for a ventilated hole in the filling cap! Use always the most suitable medium to fill the chemical tank,
the material of the internal tank exists of polythene.
Take care that the tank is always protected sufficiently against the used medium.
Traffic:
Protect piping and cables which run over a roadway with dock boards.
Personal security measures:
The machine not move during the use. Avoid a bad posture.
Consult at skin penetration immediately a doctor and communicate certainly the type of used product.
Vibrations (hand/arm):
The hand/arm vibrations have no harmful influence at use of a cleaner with normal nozzle.
The action value of 2.5 m/s² and limit value of 5 m/s² (= risk indication) are hereby not reached at intensive use
on weekly basis! A long use of the cleaner with possible rotating head can cause physical ills such as: blood flow
disturbances, through vibrations on lance and spray gun.
Therefore, care your personal protective measurements such as protective gloves.
With regular, prolonged use of the cleaner and repeated occurrence of symptoms (e.g. tingling of fingers, cold
fingers, pain in joints of hand/arm, nerve disorder), we recommend to take a medical check- up!
Continuous operation during a long period is not recommended at use of the lance with rotating head, so work
with pauses to reduce the exposure time, use alternating the ordinary spray nozzle during a period or change
regularly of user!
Note: the version with reel reduces the vibration exposure time.
Increasing the water temperature (for ex.: through the hotbox) does not raises the vibration exposure time.
Electrostatic discharge (ESD):
This is the discharge of the static electricity. This happens when two objects are slid concerning each other or
become separated apart. When these two materials come with different charge in each other's vicinity or make
contact, there will take place a discharge.
This discharge could cause damage to electronic parts and appliances.
So take care you are discharged before using the cleaner.
It is recommended that you connect this device to a socket that has a 30 mA protection switch against wrong cur-
rents.
Indication of possible inhalation of aerosols:
During use of the cleaner aerosols can arise. These aerosols are harmful to the health. Take the necessary pre-
cautions to prevent possible inhalation of aerosols (eg dust masks to protect, FFP Class 2 or higher). The DiBO
lance is equipped with a protective cap in front that offers minimal protection against the release of aerosols.
ECN-S REV 0 DiBO n.v. 38