Using The Remote Control; Remote Control Description - Sony TRINITRON KV-27FS100L Instructions De Service

Using the Remote Control

Remote Control Description

A
B
C
D
E
F
G
H
I
J
Button
1 MUTING
2 SYSTEM OFF
K
3 TV/VCR
L
M
N
4
PICTURE MODE
O
P
5 SLEEP
Q
6
JUMP
R
S
T 7 TV/SAT
U
8
RESET
9
VOL (volume)
q; CODE SET
qa POWER buttons
Description
Press to turn off the sound. Press again or press
to restore sound.
Press to turn off the equipment programmed into
the remote control. See "Programming the Remote
Control" on page 5.
Press to switch between TV and VCR mode. If you
have a non-Sony VCR, you will need to program
the remote control to recognize your VCR. For
details; see "Programming the Remote Control" on
page 5.
Press repeatedly to step through the available video
picture modes: Vivid, Standard, Movie and Sports.
Also available in the Video menu. See "Using the
Video Menu" on page 24 for details.
Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV
to remain on before shutting off automatically.
Cancel by pressing until Sleep Off appears.
Press to jump back and forth between two channels.
The TV alternates between the current channel and
the last channel that you selected. JUMP will not
work if any FUNCTION Mode (VCR/DVD, SAT/
CABLE, TV) is activated.
Press to switch between the TV and SAT (satellite)
inputs when in SAT FUNCTION mode.
Press for a direct selection of Effect settings
(Surround, Off) when the remote is in TV
FUNCTION mode.
See "Using the Audio Menu" on page 25 for details.
Press to return to factory settings while in an
on-screen menu.
Press (+) or (-) to adjust the volume.
Press to program your remote control to operate
connected video equipment. See "Programming the
Remote Control" on page 5.
Press to turn on and off the TV and other audio/
video equipment you have programmed into the
remote control. For instructions, see "Programming
the Remote Control" on page 5.
3