Transmitter Identity Code Programming - Orion OREL Notice D'installation Et D'utilisation

7.2- Transmitter identity code programming

Transmitter and receiver are linked by a radio channel and an identity code.
During the «association» programming procedure, one or several relays of the
receiver(s) are going «to learn» the identity code of one or several transmitters.
This identity code is programmed on the transmitter, it is freely chosen by the
user to personalize its installation.
The Orion transmitter provides a significant choice of possible identity
codes :
This large number of codes is obtained by mixing the « Identity code
group » (16 groups max.) and the codes programmed using the 8-cursor
DIP-Switch (256 codes).
Transmitter
identity code
We strongly recommend that you change this code to
ensure the uniqueness of your installation and avoid any
unintentional commands from another system which may
already be installed.
The identity code group is chosen by special programming implementing
the internal pushbutton S1, and B1/B2 buttons :
B1
B1 B2
B3 B4
Va
+ -
électronique
S1
+
ON
1 2 3 4 5
OREV
FR
- 78 -
=
B2
Vb
Button
«On/Off»
6 7 8
+
EN DE
4096
possibilities
Group number
(01 to 16)
B1
B1 B2
B3 B4
Button
«On/Off»
Va
électronique
S1
ON
1 2 3 4 5 6 7 8
+
8-cursor DIP_Switch
code (256 possibilities)
B1 B2
B2
B4
B3
B6
B5
Vb
électronique
B1 B2
B3 B4
B5 B6
B7 B8
électronique
OREL
Orion - 324501J
B1 B2 B3
B4 B5 B6
B7 B8 B9
B10 B11 B12
électronique
B1 B2 B3 B4
B5 B6 B7 B8
B9 B10 B11 B12
B13 B14 B15 B16
électronique