Servicing the ORR receiver :
Verify regularly the following points:
- Wiring of receiver to electrical unit on machine.
- Control relay contacts.
- Condition of cover seal and its correct position,
- tightening of screws and cable glands (ORRS and ORRA) and tightness
of antenna.
- If accessory OWR01 (external BNC antenna connector for ORRA and
ORRS receiver) is used, check the antenna connection and check that
it is clean and free of any oxidation.
- Clean the receiver by eliminating any foreign matter.
Only use non aggressive cleaning product on base of soapy
solution.
Orion - 324501J
DE
EN
FR
- 107 -