Rheem GEN20AD-E Guide D'utilisation page 12

15kW, 16kW and 20kW Generator (Back View)
Read this Operator's Manual and Important Safety Instructions before operating your generator.
Compare the illustrations with your generator to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
G
F
E
D
C
B
A
Generator is shown with roof and access covers removed
for clarity.
A - Lifting Holes — Provided at each corner for lifting
generator.
B - Fuel Solenoid — Automatically opens and closes to
supply fuel to unit when needed.
C - Fuel Regulator — Controls fuel flow to engine for proper
operation.
D - Fuel Selector Valve — Used to select proper fuel type
(LP or NG).
E - Spark Plug — A device in the cylinder head of the engine
that ignites the fuel mixture by means of an electric spark.
12
rs r rs re F - Oil Fill Cap — Location for adding oil to engine.
G - Electrical Field Wiring Inlet — Wires to and from
generator are centered in this location.
H - Air Cleaner — Uses a dry type filter element to protect
engine by filtering dust and debris out of intake air.
J - Engine Oil Dipstick — Allows user to check engine oil
level easily.
K - Oil Heater Port — Provided to allow an optional heating
element to be installed to warm engine oil to promote
easy starting in cold climates.
H
J
K