Maico AP 100 Instructions De Montage Et Mode D'emploi page 14

AP 100,100 B,120,150/1
SG 100,100 B,120,150/1
ing holes on the external wall, drill and
insert dowels.
4. Push the AP shutters/SG external grilles
with the flange into the wall sleeve and
screw to the wall with 4 screws. Ensure the
correct position of the sealing strip. Note
the installation position: with Maico letter-
ing on the bottom right.
5. If necessary, insert optional fly screen FG
into the shutter/the external grille.
6. Press the housing unit onto the receptacle
so that it audibly engages in the 4 locking
tabs.
7. Seal the AP shutters/the SG external grille
to the wall in a manner that is permanently
elastic and weatherproof. Suitable sealing
material (silicon) is to be provided by the
customer.
8. Function test AP variant: Check the ease of
movement of the slats.
7 Cleaning
If necessary, clean the AP shutter/SG external
grille with a dry cloth. Frequency depends on
DE
UK
VENTILATOREN
FR