Dc Power Measurement - Nieaf-Smitt Solar EazyPV Mode D'emploi Rapide

Solar

DC Power measurement

(optional currentclamp required)
1. Connect the current clamp to the 4 mm
inputs
2. Press the button until the clamp icon
appears on the LCD of the EazyPV
3. Move the current clamp into the 40 A
position
4. Zero clamp according the manual of the
clamp
5. Press the clamp around the DC cable of the
solar installation
6. DC current is shown on the LCD next to the
clamp icon
7. Connect the PV voltage to the PV inputs,
T or Y test adapters are required to
measure the DC power while the PV
system is operational
8. The DC voltage, current and power will be
displayed
www.nieaf-smitt.com
26