General; Specifications; Insulation Resistance; Warnings - Nieaf-Smitt Solar EazyPV Mode D'emploi Rapide

General

Specifications

Function Range
Rpe 0 Ω...199 Ω / 30 V...440 V
Vo/c 5 V... 1000 V
Is/c 0.5 A...15 A
Insulation 0.5 MΩ...199 MΩ
I AC/DC 0.1 A...40 A

Insulation resistance

Viso Limit
250 V 0.5 MΩ
500 V 1.0 MΩ
1000 V 1.0 MΩ

Warnings

Check the operational manual for full information.

Memory

Capture of all measurements currently on the LCD
Recall measurements on the LCD
In 'call'modus modus, scroll function
+ Clear all results from memory
Downloading the measured value memory via the USB-interface
1. Install the driver and program from the supplied CD-ROM (once)
2. Disconnect all the leads from the EazyPV
3. Connect the EazyPV to the PC via the supplied USB-cable
4. Select in the software the correct COM-port and click the 'Download' icon
5. Switch on the EazyPV by pressing
6. Press the recall button for 2 s to start the download
7. The data will be downloaded to the PC
Changing auto shutdown time
1. Switch off the EazyPV
2. Press and hold the 'NULL' key
while holding the 'NULL' key
3. The display will show 'OFF' on line 1 and the turnoff time on line 2 (in minutes)
4. Keep holding the 'NULL' key
5. Each press of the 'Viso' key will increment the switch off time
for approx. 2 seconds
and then press both the on/off keys together
and press the 'Viso' key
Solar
www.nieaf-smitt.com
27