Trouble Shooting - Gaggenau AC230101 Notice D'utilisation Et De Montage

Trouble shooting

en
T rouble shooting
3
M alfunctions often have simple explanations. Please
T r o u b l e s h o o t i n g
read the following notes before calling the after-sales
service.
Fault
The appliance does not work
The remote control is not working
After the appliance has been switched
off, the LEDs 1-5 flash three times.
LED 1 or LED 2 flashes in the display
--------
42
m
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.
Possible cause
The plug is not plugged into the mains
Power cut
The fuse is faulty
The battery is flat
The battery is nearly flat
The grease filter or the odour filter is sat-
urated.
Warning – Risk of electric shock!
Solution
Connect the appliance to the power
supply
Check whether other kitchen appliances
are working
Check in the fuse box to make sure that
the fuse for the appliance is in working
order
Change the batteries in the remote con-
trol, see section ~
batteries in the remote control"
on page 41
Change the batteries in the remote con-
trol, see section ~
batteries in the remote control"
on page 41
Clean the grease filter or change the
odour filter. ~
maintenance" on page 38
"Replacing the
"Replacing the
"Cleaning and