C Onnecting To A Hob; Setting Up A Connection - Gaggenau AC230101 Notice D'utilisation Et De Montage

C onnecting to a hob

e
Y ou can connect this appliance to a hob (if the hob
C o n n e c t i n g t o a h o b
supports connection to the appliance) and then control
the functions of the hood via your hob.
There are various options for connecting the appliances
together:
Home Connect
Two appliances can be connected using the Home
Connect app provided that both of them are Home
Connect-compatible.
Refer to the Home Connect documents supplied for
more information.
Connecting appliances directly
If the appliance is connected directly to a hob, it cannot
be connected to your home network as well. The
appliance works like an extractor hood that is not
connected to the network and you can continue to
operate it via the control panel.
Connecting appliances via your home network
If the appliances are connected to each other via your
home network, both the hood controls on the hob and
Home Connect can be used to operate the appliance.
Notes
– Make sure you follow the safety instructions in the
instruction manual for your extractor hood and that
these are complied with even when operating the
appliance via the hood controls on the hob.
– If the appliance is being operated by means of the
controls on the extractor hood, this mode of
operation always has priority. It is not possible to
use the hood controls on the hob during this time.

Setting up a connection

The hood must be switched off before you can connect
the hob and extractor hood.
Connecting directly
Make sure that the hob is switched on and is in search
mode.
To do this, refer to the section entitled "Connecting to
the extractor hood" in the instruction manual for your
hob.
Notes
– Before connecting the appliances, reset all existing
connections to your home network or other
appliances.
– If your extractor hood is connected directly to the
hob, it cannot be connected to your home network
as well and you will not be able to use Home
Connect.
Press and hold the D button until the Home Connect
LED starts flashing.
The extractor hood has been connected to the hob when
the Home Connect LED stops flashing and remains
continuously lit.
Connecting via your home network
Follow the instructions in the section entitled
"Automatic login to your home network" or "Manually
logging into your home network" ~
on page 36
Once the extractor hood is connected to your home
network, you can connect to the hob via the Home
Connect app. To do this. follow the instructions on your
mobile device.
Connecting to a hob
"Home Connect"
en
35