Fitting The Filter Cover; Removing The Appliance - Gaggenau AC230101 Notice D'utilisation Et De Montage

Installation
en

Fitting the filter cover

m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
m
Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
1 Open the hinges on the filter cover.
2 Mount the filter cover on the designated screws and
push it backwards/forwards depending on the key
hole opening into the narrow section.
3 Tighten the fastening screws of the hinges.
4 Swing the filter cover up and ensure that it
engages.
5 Connect a power supply.
50

Removing the appliance

m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
m
Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
m
Warning – Risk of injury!
The appliance is heavy. To move the appliance, 2 people
are required. Use only suitable tools and equipment.
1 Disconnect the appliance from the power supply.
2 Press down on the locks on the filter cover.
Note: The filter cover is heavy. Take the filter cover
by two hands and hold in place.
3 Open the filter cover fully and without pulling on it.
4 Undo the screws on the hinges up to approx. 7 mm.
Note: Do not loosen them fully.
5 Unhook and remove the filter cover.
6 Remove the grease filters.