Checking The Water Hardness; Tips On Energy Saving; Daily Maintenance And Cleaning; Daily Maintenance - Bosch TCC78K750 Mode D'emploi

42 | English
Warning:
Adjust the grinding unit only while
it is running. Otherwise the appli-
ance may be damaged.
Deploy the appliance fully (see " D eploy-
ment system" ) .
In the drink selection menu, select
Esprщsso
o
start/stop (10).
While the grinding unit is running, adjust
tСО rШtarв sОХОМtШr (18) ПrШm iЧО
The new setting will not
become apparent until after the
second cup of coffee.
Tip: For dark roast coffee beans, choose a
iЧОr РrТЧН, ПШr ХТРСtОr bОaЧs a МШarsОr РrТЧН.

Checking the water hardness

The water hardness setting can be adjusted
on this appliance. It is important to set the
water hardness correctly, so that the appli-
ance indicates accurately when the descal-
ing programme should be run. The factory
setting for the water hardness is 4.
Y o u can check the water hardness using the
enclosed test strip or by asking your local
water supplier.
DТp tСО tОst strТp brТОlв ТЧ аatОr, РОЧtХв

Tips on energy saving

 The fully automatic espresso machi
switches to " e nergy saving mode" aut
matically after one hour (factory set
The appliance uses very little power
" e nergy saving mode" . The default tim
of one hour can be shortened (see " A
off after" under " D isplaying settings" ) .
The appliance then uses even less
power.
 If the appliance is not being used, s
it off at the power switch.
 If possible, do not interrupt coffee o
froth dispensing. Stopping a proces
prematurely results in higher energy
МШЧsumptТШЧ aЧН tСО НrТp traв iХХs up

зщrviчщ Б шщsчхlщ

Daily maintenance

and cleaning
Risk of electric shock
Before cleaning the appliance,
switch it off at the power switch.
Do not use a steam cleaner.
Daily maintenance
Wipe the outside of the appliance w
a soft, damp cloth. Do not use abras
cloths or cleaning agents.
Do not use alcohol-based or spirit-b
cleaning agents on the high-gloss s
faces.
Rinse out the water tank (14) with w
only.