The Panel Installation - Gree Free match GKH 12 BB-K6DNA3A/I Mode D'emploi

DC Inverter Free match Series Cassette Type Unit
5.4.4 Testing of Drain Piping
Shown in the Fig.30, Add approximately 1liter of water slowly into the drain pan and check
Drain vent for repair use (plastic stopper
is included) (drain the water in waterspoit
by this outlet vent)

5.5 The Panel Installation

5.5.1 Precautions
(1).
(2). Improper screwing of the screws may cause the troubles shown in Fig.32.
Above 100mm
<Immiting water from the outlet vent terminal>
Fig.30
Fig.31
Condensate
Fig.32
Drain hose
<Immiting water from the rest hole>
Plastic water pot (The length of
the pipe should be about 100mm.)
The connecting
pipe should be located
corresponding to
the marking.
25
Test hole cover
Test hole